MySQL Server Forum - Mysql-DBD Perl module Installation Problem in HPUX

Author

Mysql-DBD Perl module Installation Problem in HPUX

smsabu2002@yahoo.com

2005-06-30, 11:23 am

Hi,

I am facing the build problem while installing the DBD-MySql perl
module (ver 2.9008) using both GCC and CC compilers in HP-UX machine.

For the Build using GCC, the compiler error is produced due to the
unknown GCC compiler option "+DAportable".

For the Build using CC, the preprocessor error is produced due to the
recursive declration of macro "PerlIO" in perlio.h file.

Please give me the solution to get rid of this problem.

Thanks in advance.

Regards,
Arun.

The following is the log for both build.

====================
====================
====================
====================
==========
DBD-Mysql-2.9008 Perl module Build in HP-UX 11.11 using GCC
====================
====================
====================
====================
==========

# uname -a
HP-UX hpccase B.11.11 U 9000/871 2015587066 unlimited-user license

# perl -v
This is perl, v5.8.7 built for PA-RISC2.0

# gcc -v
Using built-in specs.
Target: hppa2.0w-hp-hpux11.11
Configured with:
/scratch/joseph/pkgbuild/3.3.1/hpux-11/gcc-4.0.0/configure
--enable-languages=c,c++ --enable-threads=posix --disable-nls

--disable-libmudflap --with-gnu-as --without-gnu-ld
--with-as=/usr/local/bin/as --with-ld=/usr/ccs/bin/ld
--prefix=/usr/local
Thread model: posix
gcc version 4.0.0

# perl Makefile.PL CC=gcc
I will use the following settings for compiling and testing:

cflags (mysql_config) =
-I/cmdisk1/mysql-max-4.1.12-hp-hpux11.11-hppa2.0w/include +DAportable
libs (mysql_config) =
-L/cmdisk1/mysql-max-4.1.12-hp-hpux11.11-hppa2.0w/lib -lmysqlclient -lz
-lcrypt -lnsl -lm
mysql_config (guessed ) = mysql_config
nocatchstderr (default ) = 0
nofoundrows (default ) = 0
ssl (guessed ) = 0
testdb (default ) = test
testhost (default ) =
testpassword (default ) =
testsocket (default ) =
testuser (default ) =

To change these settings, see 'perl Makefile.PL --help' and
'perldoc INSTALL'.

Note (probably harmless): No library found for -lz
Using DBI 1.48 (for perl 5.008007 on PA-RISC2.0) installed in
/opt/perl/lib/site_perl/5.8.7/PA-RISC2.0/auto/DBI/
Writing Makefile for DBD::mysql
# make
gcc -c -I/opt/perl/lib/site_perl/5.8.7/PA-RISC2.0/auto/DBI/
-I/cmdisk1/mysql-max-4.1.12-hp-hpux11.11-hppa2.0w/includ
e +DAportable - DDBD_MYSQL_INSERT_ID
_IS_GOOD -g -mpa-risc-2-0
-D_HPUX_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/pro/l
ocal/include -D_LARGEFILE_SOURCE - D_FILE_OFFSET_BITS=6
4 -g -O
-DVERSION=\"2.9008\" -DXS_VERSION=\"2.9008\" -fPIC "-I/opt/
perl/lib/5.8.7/PA-RISC2.0/CORE" dbdimp.c
gcc: +DAportable: No such file or directory
*** Error exit code 1

Stop.

====================
====================
====================
====================
==========

====================
====================
====================
====================
==========
DBD-Mysql-2.9008 Perl module Build in HP-UX 11.11 using HP C
compiler (cc)
====================
====================
====================
====================
==========

# perl Makefile.PL CC=cc
I will use the following settings for compiling and testing:

cflags (mysql_config) =
-I/cmdisk1/mysql-max-4.1.12-hp-hpux11.11-hppa2.0w/include +DAportable
libs (mysql_config) =
-L/cmdisk1/mysql-max-4.1.12-hp-hpux11.11-hppa2.0w/lib -lmysqlclient -lz
-lcrypt -lnsl -lm
mysql_config (guessed ) = mysql_config
nocatchstderr (default ) = 0
nofoundrows (default ) = 0
ssl (guessed ) = 0
testdb (default ) = test
testhost (default ) =
testpassword (default ) =
testsocket (default ) =
testuser (default ) =

To change these settings, see 'perl Makefile.PL --help' and
'perldoc INSTALL'.

Checking if your kit is complete...
Looks good
Note (probably harmless): No library found for -lz
Using DBI 1.48 (for perl 5.008007 on PA-RISC2.0) installed in
/opt/perl/lib/site_perl/5.8.7/PA-RISC2.0/auto/DBI/
Writing Makefile for DBD::mysql
# make
cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm
cp lib/DBD/mysql/GetInfo.pm blib/lib/DBD/mysql/GetInfo.pm
cp lib/Mysql.pm blib/lib/Mysql.pm
cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod
cp lib/Mysql/Statement.pm blib/lib/Mysql/Statement.pm
cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm
cc -c -I/opt/perl/lib/site_perl/5.8.7/PA-RISC2.0/auto/DBI/
-I/cmdisk1/mysql-max-4.1.12-hp-hpux11.11-hppa2.0w/include +DAportable

- DDBD_MYSQL_INSERT_ID
_IS_GOOD -g -mpa-risc-2-0 -D_HPUX_SOURCE
-DDEBUGGING -fno-strict-aliasing -pipe -I/pro/local/include

-D_LARGEFILE_SOURCE - D_FILE_OFFSET_BITS=6
4 -g -O
-DVERSION=\"2.9008\" -DXS_VERSION=\"2.9008\" -fPIC

"-I/opt/perl/lib/5.8.7/PA-RISC2.0/CORE" dbdimp.c
(Bundled) cc: warning 480: The -g option is available only with the
C/ANSI C product; ignored.
(Bundled) cc: warning 422: Unknown option "m" ignored.
(Bundled) cc: warning 480: The -p option is available only with the
C/ANSI C product; ignored.
(Bundled) cc: warning 422: Unknown option "a" ignored.
(Bundled) cc: warning 422: Unknown option "-" ignored.
(Bundled) cc: warning 480: The -r option is available only with the
C/ANSI C product; ignored.
(Bundled) cc: warning 422: Unknown option "i" ignored.
(Bundled) cc: warning 422: Unknown option "-" ignored.
(Bundled) cc: warning 422: Unknown option "2" ignored.
(Bundled) cc: warning 422: Unknown option "-" ignored.
(Bundled) cc: warning 422: Unknown option "0" ignored.
(Bundled) cc: warning 422: Unknown option "f" ignored.
(Bundled) cc: warning 480: The -p option is available only with the
C/ANSI C product; ignored.
(Bundled) cc: warning 422: Unknown option "i" ignored.
(Bundled) cc: warning 480: The -p option is available only with the
C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -e option is available only with the
C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -g option is available only with the
C/ANSI C product; ignored.
(Bundled) cc: warning 480: The -O option is available only with the
C/ANSI C product; ignored.
(Bundled) cc: warning 422: Unknown option "f" ignored.
cpp: "/opt/perl/lib/5.8.7/PA-RISC2.0/CORE/perlio.h", line 114: error
4065: Recursion in macro "PerlIO".
*** Error exit code 1

Stop.
#

====================
====================
====================
====================
==========

Bill Karwin

2005-06-30, 1:23 pm

smsabu2002@yahoo.com wrote:
> Hi,
>
> I am facing the build problem while installing the DBD-MySql perl
> module (ver 2.9008) using both GCC and CC compilers in HP-UX machine.
>
> For the Build using GCC, the compiler error is produced due to the
> unknown GCC compiler option "+DAportable".

This is a flag for the HP compiler; it is not understood by GCC.
It's a flag to cause the compiler to produce code that works on both
PA-RISC 2.0 and PA-RISC 1.1 architectures.

I'd edit the generated Makefile to remove this flag from compile
commands. That might be enough to get gcc to work.

Perhaps it's picking up the flag from Perl's Config.pm. Try `perl -V'
(that's capital V) to get more information about Perl's configuration
for compiler options. You might have to edit your Config.pm to get rid
of this, or else you'll run into this issue each time you install a Perl
module that includes C code.

> For the Build using CC, the preprocessor error is produced due to the
> recursive declration of macro "PerlIO" in perlio.h file.

You also have several GCC-specific flags that cause HP cc to complain,
like -m and -f.

It's desireable to compile the DBD-mysql extension with the same
compiler and compiler options as those which were used to build the perl
binary itself. Running `perl -V' should tell you what compiler was used
to build perl. I'm guessing it was build with gcc, for the reason of
the macro in perlio.h.

Sorry I can't offer more definitive suggestions, but I don't use HP-UX
much these days.

Regards,
Bill K.

Sponsored Links